With ranges of ±5 through ±50000 pounds*, the tension/compression load cells of the 441 Series employ two stabilizing diaphragms which are welded to the sensing member to reduce off-axis and side-loading effects. Cased in 17-4 PH stainless steel, they have a threaded hole running completely through the center of the cell.
These models must be used on a flat, smooth surface to achieve rated specifications. An optional 1"-thick Center Pull Plate is available for attachment to any Series 441 unit. This allows the applied force to be directed along the load axis. Separate load buttons may also be obtained, to be threaded directly into the center hole.
If required, any Series 441 load cell can be supplied with a clearance hole instead of a thread.
- 441-5 through 441-25
- 1/4-28 UNF
*Ranges above 50000 pounds are available upon request.
These models must be used on a flat, smooth surface to achieve rated specifications. An optional 1"-thick Center Pull Plate is available for attachment to any Series 441 unit. This allows the applied force to be directed along the load axis. Separate load buttons may also be obtained, to be threaded directly into the center hole.
If required, any Series 441 load cell can be supplied with a clearance hole instead of a thread.
- 441-5 through 441-25
- 1/4-28 UNF
*Ranges above 50000 pounds are available upon request.