The VM-BAL software module, part of the VibroMetra vibration measurement system, is engineered for precise on-the-spot balancing of both long and disk-shaped rotors under operational conditions, aimed at vibration reduction. It supports one or two-plane balancing with features like automatic operation via rotary speed detection, simple setup, and user-friendly instructions for ease of operation. The software's ability to save and continue measuring runs later, along with auxiliary functions like test mass and RPM recommendations, enhance user support.
Features for VM-BAL Models
| VM-BAL |
| Mass correction by adding mass |
| Balancing aim unbalance/mass |
| Vibration measurands: v |
| VM-BAL+ |
| Mass correction by adding mass |
| Mass correction by removing mass |
| Mass correction at fixed positions: 3 to 99 |
| Balancing aim unbalance/mass |
| Vibration measurands: v |
| VM-BAL++ |
| Mass correction by adding mass |
| Mass correction by removing mass |
| Mass correction by drilling or milling |
| Mass correction by rotary rings |
| Mass correction by sliding blocks or set screws |
| Mass correction at fixed positions: 3 to 99 |
| Mass correction with a list of mass pieces |
| Balancing aim unbalance/mass |
| Balancing aim balance quality |
| Balancing aim vibration amplitude |
| Rotary speed recommendation |
| Creating a defined unbalance |
| Test mass recommendation |
| Leave test mass at rotor |
| Combine correction masses of several balancing runs |
| Saving rotor data |
| Saving balancing runs |
| Vibration measurands : a; v; d |
You can find a step-by-step process for precision balancing, for VM-BAL MMF in this video:
