The OMX 380 model range are very fast digital transmitters to DIN rail with and Teach-in function. Modifications available are PM, DU and T. The instrument is based on a single chip microcontroller, 24-bit A/D and 16-bit D/A converter, which ensures good accuracy, stability and easy operation of the instrument. Model OMX 380PM is an extremely fast digital transducer used as a galvanic separator of standardised analogue signals and a convertor between them.
The instrument is controlled by two push buttons on the front panel. The mode
of the output signal and the access to the teach-in mode is realised by a switch
at the rear. Standard equipment is the OM Link interface, which together with
operating program allowes modification and filing of all instrument‘s settings as
well as performing firmware updates (with OML cable). All settings are stored in the EEPROM memory (they hold even after the instrument
is switched off).
The instrument is controlled by two push buttons on the front panel. The mode
of the output signal and the access to the teach-in mode is realised by a switch
at the rear. Standard equipment is the OM Link interface, which together with
operating program allowes modification and filing of all instrument‘s settings as
well as performing firmware updates (with OML cable). All settings are stored in the EEPROM memory (they hold even after the instrument
is switched off).