Model range OMX 333 are simple DIN rail mountable programmable signal conditioners. The range consists of UNI, DC, PWR and UQC versions. Type OMX 333UNI is a multifunction device which allows the selection from 8 inputs easily configurable in the instrument's menu. OMX 333DC a OMX 333PWR are versions used for measurement of higher DC and AC voltage and current. The instrument is based on a single-chip micro controller with a 12bit A/D and D/A convertor which provides high accuracy, stability and ease of use. OMX 333UQC version is a universal counter/frequency meter.
Instrument can be controlled by two push buttons and a DIP switch located on the front panel. When frequent change of settings are needed, we recommend the use of OM Link interface which in conjunction with free control SW allows for modification and storage of all instrument's settings as well as for the firmware upload from a PC using OM Ling cable.
The above mentioned SW can also be used for visualization and archiving of measured values from a number of instruments via the RS 485 line.
All instrument's settings are stored in an instrument's EEPROM memory (even after powered-off)
Instrument can be controlled by two push buttons and a DIP switch located on the front panel. When frequent change of settings are needed, we recommend the use of OM Link interface which in conjunction with free control SW allows for modification and storage of all instrument's settings as well as for the firmware upload from a PC using OM Ling cable.
The above mentioned SW can also be used for visualization and archiving of measured values from a number of instruments via the RS 485 line.
All instrument's settings are stored in an instrument's EEPROM memory (even after powered-off)