The 9243 is a highly accurate precision amplifier that performs the amplification of the sensor signal being applied. Current and voltage outputs are available simultaneously.
The sensor excitation is performed by the amplifier module itself so that no additional voltage source is required. It can also be set in steps of 2.5 V, 5 V, 10 V using DIP switches. The maximum feed current of 35 mA permits parallel connection of several strain gages, e.g. for the addition of measurement variables. Measurement errors brought about by varying line lengths or due to temperature fluctuations effecting the sensor cable are avoided by having probe lines measuring the actual feed voltage directly on site at the sensor itself (6 wire technology).
Fluctuations are immediately corrected electronically. The cut-off frequency of the amplifier can be
switched between 10 Hz and 1 kHz. The DIP switches for configuring the entire device are found easily accessible, under a cover.
9243
Strain Gauge & Potentiometer Input Signal Conditioning Amplifier
Burster Praezisionsmesstechnik Gmbh
- Strain Gauge & Potentiometer Input Amplifier
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- DIN Rail Mounted
- In-Line Amplifier (Option)
- Aluminum Housing
- Protection Class: IP40
Details
Specifications
Input Type
0 - 10 mV DC
0 - 100 mV DC
0 - 1 V DC
0 - 10 V DC
±10 V DC
Potentiometer
Strain Gauge
0 - 100 mV DC
0 - 1 V DC
0 - 10 V DC
±10 V DC
Potentiometer
Strain Gauge
# of Inputs
1
Output Type
±5 V DC
±10 V DC
0 - 20 mA
4 - 20 mA
±10 V DC
0 - 20 mA
4 - 20 mA
Max Bandwidth
1 kHz
4 kHz
4 kHz
Excitation
2.5 V DC
5 V DC
10 V DC
5 V DC
10 V DC
Models
9243
DIN Rail Mounted, IP20
9243-IP65
In-Line Amplifier, IP65
9243-V001
Cut-off Frequency 4 kHz
Related
Burster's new 9250/9251 amplifier module is easy to use and adaptable. Use individually or with bus controller (9251), can be integrated into any existing setup.
The AMP320 is a highly accurate precision amplifier that performs the amplification of the sensor signal being applied. Current and Voltage outputs are available. The sensor excitation is performed by the amplifier module itself.
The AMP330 is a highly accurate precision amplifier that performs the amplification of the sensor signal being applied. Current and voltage outputs are available simultaneously. The 10Vdc sensor excitation is performed by the amplifier module itself.