- Absolute Gauge Technologies™
- Measurement & Control Solutions
Absolute Gauge Technologies has a wide selection of signal conditioners, amplifiers and isolators to meet your application requirements. All signal type from strain gage to lvdt, pententiometer to accelerometer, voltage to current loop, we have solutions ideal for single channel to large channel count measurement systems.
9221
- Universal Sensor Input Module
- Accuracy: < 0.03%
- DIN Rail Mounted Module
- Aluminum Housing
- Protection Class: IP20 (IP65 Option)
| Interface | RS-232 |
| Input Type | ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | Profibus |
| Max Bandwidth | 2 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
9235
- Strain Gauge Input Amplifier
- Accuracy: < 0.10%
- In-Line Amplifier
- Aluminum Housing
- Protection Class: IP40 (IP65 Option)
- Space saving, lightweight
- Non-interchangeable and short circuit-proof
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 2.5 V DC |
| Isolation | No |
9236
- Strain Gauge Input
- 50 V Continuous Isolation
- Accuracy: 0.10%
- Multi-Channel up to 4 Inputs
- Aluminum Housing
- Available as Open Circuit without Housing
- Simple configuration using DIP switch
- Protection Class: IP20 (IP67 Option)
| Input Type | Strain Gauge |
| # of Inputs | 1, 2, 3, 4 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 2.5 V DC |
| Isolation | No |
9243
- Strain Gauge & Potentiometer Input Amplifier
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- DIN Rail Mounted
- In-Line Amplifier (Option)
- Aluminum Housing
- Protection Class: IP40
| Input Type | ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 4 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
| Isolation | Yes |
9250
- Ultra-fast pushbutton configuration
- Non-linearity < 0,005 % F.S.
- Outputs ±10 V, ±5V and 0 (4) - 20 mA
- 6 wire technique
- Automatic sensor recognition due to Burster TEDS
- Adjustable cut-off frequencies
- Versatile configuration using DigiVision PC software
- via USB port
- bus controller 9251 option
- 8 measurement channels
9251
- Supports up to eight additional instrumentation amplifiers.
- Real-time Fieldbus communication for fast data processing.
- Standalone or multi-channel system compatibility.
- Multi-interface support including PROFINET, EtherCAT, and EtherNet/IP.
- Precision measurement with non-linearity below 0.005% F.S.
- USB connectivity for easy configuration and management.
- Measuring input: Strain gage, Potentiometer, ±10 V
- High measurement accuracy
- High measurement speed
- Saves space in the control cabinet
| Interface | PROFINET, EtherCAT, EtherNet/IP |
| Input Type | ±10 mV DC, Potentiometer, Strain Gauge |
| # of Inputs | 8 |
| Supply Power | 11 - 30 V DC |
| IP Rating | IP 20 |
| Min Temperature | 0°C |
CPJ/CPJ2S
- The CPJ is able to run up to 4 Strain Gauge load cells (350 )
- 4 or 6 wire load cell
- Voltage output (±10 Vdc or 0-10 Vdc) and current output (4-20 mA)
- Shunt Calibration signal
- 2 set points on Relays optional version CPJ2S
- IP65 Housing option (CPJ model ONLY)
- Din rail mount
| Input Type | Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, ±10 V DC, 4 - 20 mA |
| Isolation | Yes |
| Supply Power | 20 - 28 V DC |
| IP Rating | IP 65 |
GM40
- High Accuracy
- For Switch Cabinet Assembly, Width 23 mm, only
- Direct Connection to PLC
- Long Input Lead from GM 40 to Evaluation possible
- Easy to operate
- Voltage or Current Output
- DIN Rail Mount
- Rating: IP20
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | Yes |
GM42
- For Switch-Cabinet Assembly, Width only 23 mm
- Min.-Max. Memory Device Extension to GM 40
- 10...30 V DC Supply, galvanically separated
- Very easy Operation
- Each one Reset Input via Opto Couplers
- Fast Rise Time <0.2 ms
- Voltage Input 0-10 V
| Input Type | ±10 V DC |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Max Bandwidth | 5 kHz |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC |
GM62
- 10...30 V DC Supply, Galvanic Separation
- For Switch-Cabinet Assembly, Width 23 mm only
- Sensor Excitation 6...10 V adjustable
- Voltage Output 0...+/-10 V
- 2 Parallel Sensor Connections
- Direct Connection to PLC
- External Control
- Very Easy Operation
- Abatable Clamps
- DIN Rail Mount
- Rating: IP 21
| Input Type | Strain Gauge |
| # of Inputs | 2 |
| Output Type | ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 6 - 10 V DC |
| Isolation | Yes |
